Showing posts with label R5 350. Show all posts
Showing posts with label R5 350. Show all posts

Blastin holes is rock n roll Mile 294.4



Like Lee said "it looked as if he slammed his brakes on and i blasted past him". Blasted a hole in the piston, and all the debris ate the piston up like a fat kid on cake. I'm going through the troubleshooting to find the problem but my attention span is getting shorter. Maybe I'll take a short little trip and come back in a couple months....

My suspicion is a leaning of the gas. Since the carbs are brand new and I doubt the jets that incorrect to make that much damage. I took a look around the piston and ports and noticed the right side (still intact) had a nice coat of gas on the piston, piston rod and ports. The left side did not have a lot, just gray soot. So it something clogged the transfer ports...lean mixture. But WFT clogged it, and it ran for 300 miles before this happen.

It also could be a detonation, or a high temp problem or a weak piston? But I don't think any of these problems would cause a hole like this???

What a rainy week... more time in the garage





After a nice little trip to Bloomington and a break down... I believe I have found a solution. Increasing the resistance in the primary coil circuit lowers the current. Let me spit some mad high school electronics on ya! They kind of look like power coated twix bars.



I also have been hankerin to fix my oil leaks, left and right... On the left side all I needed to do is buy a new neutral cover. Thats the little white triangle shape. But on the right side the leak is as sneaky as a fuckin ninja. I have replaced or sealed all the holes and joints on the beast. The leak is slowing but not dissapearing. A little leak never killed anybody.



My dad and I share the same passion for motorcycles Purdue and beer...

R5 in the Spotlight


From Motorcyclist Magazine...The guy at the bar looked dazed, staring out of the 1975 Yamaha RD350 ad with bitter embarrassment. The copywriter's headline served up a little back-handed solace to wash down with that last swallow of beer from the mug in his hand. "Don't feel bad. You're not the first 750 rider to get blown off by a Yamaha 350."

This "Little Engine that could", made a statement in the 70's. Fast as hell and looked good as hell. It rivaled most four-stroke bikes of that time.

A lot of racers and riders had a lot a great things to say about this bike. The Japanese really made racing and riders think twice or three times about challenging a R5...

Workin the R5

I'm most excited about this death bike build...Hopefully fast in 72 means fast now.



I am having a lot of zen moments desiging this bike. The origianl orange and now rust look reminded me of The Rocketeer. Built in his garage, now the bitch can fly!!!


My idea is old rust, and bronze (if I can figure out how to weld it). I already picked up an old wood burning stove grate. I looks awesome in my head, a couple tail lights, break light and some siding...


I got the rust and clear coat idea courteous of Hutch. I like to make the bike look meaner by raising the tank about 2-3 in. It really makes a differance. I had to pop that zip of a speedometer on the front of my snout. I knocked the cluster down to just the speedometer, then fabricated a small bracket to lower it into the headlight. Careful not to get to close that cable does not want to bend at all.



I also wanted to keep the N F C lights from the tach side so I cut the thing in half. Took off the plate from the tach and cut out the bottom half. Put it behind the speed plate and like Shampoo and Conditioner, two into one.


To be way continued...

R5


My little R5.This bike reminds me of an old man ('72 so 37, old in bike years!) with a rocket for a wheel chair. Maybe because the power to weight ratio is close to that of a superbike.I recently picked up a Motorcyclist Mag with guess what RD and R5 on the front cover with the statement 2-STROKE GIANT KILLER. Im really excited to start this tear down.



Wham, off fast than a prom dress


Dirty dirty girl...


I bought this engine frozen... After a closer look the #1 piston has rusted to the sides of the cylinder walls!! Busted it out with a hammer and broke the piston. That might be expensive to fix. Shit. It turns out to be the least of my worries.

Those carbs are done for. Completely stuck, no slide no go. I found a guy with a ULTRASONIC CARBURETOR!!! It sounds cool and Im going to go check him out, maybe, i'll work with what I got. If you have AIDS make lemonAIDS!!!!

Sorry that was bad

The engine was sent off to get cleaned at a friends shop, should get it back soon




And here is a preview of the next post
-clip ons
-single gauge
-raise tank
-neat furnace from 1870's I took apart to make some parts!!